Please register or log in.
  • (5 pages)
  • 1
  • 2
  • 3
  • 4
  • 5
  • next
  • last
Recent ads
Title Category ascendingdescending Created ascendingdescending Picture
high efficiency and low consumption ultrafine mill performance advantage Cars 02-23-18
No Picture

Environmental protection type ultrafine mill, the upgrading of new traditional mill equipment, this new ultrafine mill can completely resolve the advent of industrial milling operation dust smoke filled the predicament, thus opening a new chapter in mill industry with high efficiency and low consumption. Based on this, the following will be a simple exposition of the knowledge of the equipment related to the environmental protection ultrafine mill. The details are as follows:

One. The embodiment of high efficiency and low consumption of environmental protection ultrafine mill

1. In terms of energy saving, under the operating environment of the same output value, the new edition of environmental protection ultrafine mill machine can save 1-2 times as much as the traditional mill.

2. in the aspect of environmental protection, good equipment body sealing design, coupled with advanced pulse type dust collector equipped with auxiliary, more effective removal of up to 99.9% and, for noise pollution, but also by collocation some auxiliary silencer, so as to realize the green mill operation.

Two. The performance advantages of environmental protection ultrafine grinding

1. The fineness of the finished powder treated by environmental protection ultrafine grinding mill is even, the screening rate can reach 99%.

2. the environmental friendly ultra-fine grinding is integrated with crushing, drying, grinding and grading transportation. The layout is compact and the occupied area is small, which can save users a lot of investment cost.

3. The important parts of the machine are made of high quality castings and profiles, which can greatly improve the wear resistance of the equipment.

Three. The prospect of environmental ultra fine grinding in the market

First of all, on the one hand, energy saving and emission reduction in the current fierce voice, energy saving and environmental protection is the future development of the industrial milling equipment will trend, so destined to environmental protection in ultrafine grinding is a good prospect; Secondly, from the aspects of environmental protection, whether in the ultra-fine grinding processing ability, or in other aspects of milling effect show inferior to other high-end milling equipment, and the key is to protect the machine also pay more attention to the environment, so the environmental protection idea now, environment-friendly city will be sold into ultra-fine grinding.

Ore Milling Equipment composition and work what is the original Cars - Economy cars 02-23-18
No Picture
Ore Milling Equipment complete set of equipment from the host, reducer, analysis machine, pipe installation, blower, dust collector, jaw crusher, bucket elevator, electromagnetic vibrating feeder, electric control system. Ore Milling Equipment host, roller hanger fastened with 1000-1500 kilograms of pressure on the high-pressure spring. After starting work, the grinding roller revolves around the main shaft, and under the action of the high-pressure spring and centrifugal force, it rolls closely against the grinding ring, and its rolling pressure is 1.2 times higher than that of the Raymond flour mill under the same dynamic conditions, . When the material is grinded into the grinding chamber, the shovel shovels into the grinding roller and grinding ring between the rolling, rolling the powder with the blower circulating air into the analyzer, qualified powder with the air into the cyclone set Duster is the finished product, large particles fall back heavy mill. Circulation air back to the blower and then repeat the above process, I wind into the bag filter purify. When the grinding roller and the grinding ring reach a certain degree of wear, adjust the length of the high-pressure spring to keep the grinding roller and the grinding ring constant grinding pressure, so as to ensure stable output and fineness.
Find the Right Ore Milling Equipment Cars 02-22-18

The development of Mineral processing equipment and beneficiation process is synchronous, The process is dominant, and the equipment is the foundation. We attaches great importance to the R&D and application of stone and Ore Milling Equipment. The birth of a new type of mineral processing equipment often brought about the change of the beneficiation process. The technical level of equipment, not only is the premise of the level of mineral processes technology, but also directly affects the smooth flow of production and applications processes.

A Ore Milling Equipment is one of the main types of primary crushers in a mine or ore processing plant. Jaw Crusher is a kind of stone crusher, and jaw crusher is also called rock crusher, jaw breaker, stone jaw crusher, single toggle jaw crusher and aggregate jaw crusher. This series of stone crusher plant can reach the crushing ratio of 4-6 and the shape of final product is even. The rock crushers are widely used in mining, building materials, chemical industry, and metallurgy and so on. In the next few years, we believe that our products are exported to Southeast Asia and Africa and the Middle East's chances: first, relatively fast economic development in Southeast Asia and Africa, transportation and other infrastructure investments increase, extraction of mineral resources intensified, particularly in Africa crusher demand increases; Second, Southeast Asian and African countries such as crusher behind, need to be imported; China's products have a price advantage to a wider range into the range of options of Asian and African countries.

It is suitable for primary and secondary Ore Milling Equipment all kinds of minerals and rocks with compressive strength less than 320 MPa. In construction, road and railway building, conversancy, etc. They are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slags, construction materials, marble, etc. As a professional jaw crusher supplier, Henan jaw breakers has been sold to 75 countries, the price and quality of jaw crushers is widely recognized, we always stick to be your satisfying partner.

Gold ore crusher protection points with discrete Cars - Economy cars 02-22-18
No Picture
With the continuous development of production and technology, especially the extensive use of motor as the driving force of gold ore crusher, which is to create the conditions for the electronic crusher safeties, when the crusher serious overloading, the motor has excessive current, An overcurrent signal is sent from the sensor sample to the signal analysis and comparison device, which gives instructions to protect the crusher. gold ore crusher occurs under normal load thrust plate break, but fell into the crusher non-broken objects or a serious overloading machine, or even stand cracking. In order to overcome the shortcomings of the mechanical safety device, a hydraulic shank gold ore crusher has emerged. The gold ore crusher is characterized by a hydraulic connecting rod device, that is, power transmission, when the crusher falls into non-broken objects or the machine is seriously overloaded When the hydraulic system will increase the hydraulic pressure, if the combination valve to the high pressure relief valve setting pressure, the high pressure relief valve overflow, the connecting rod cylinder and the piston, the motion stops to swing, so that Play insurance role. gold ore crusher equipment Mechanical safety device As a gold ore crusher safety device, the thrust plate has the advantages of simple structure and low cost and is suitable for any type of driving mode. However, the device is disposable and must be replaced in case of damage. The operation is quite difficult, time-consuming and labor-intensive to reduce production efficiency, and the thrust plate is generally cast into line without the direct machining of the installation and use, due to casting error, technology and materials and many other factors that make the thrust plate for the insurance Protection points have a lot of dispersion.
Construction waste shredders have the following features Hardware - Hard disks 02-21-18
No Picture
SBM Machinery Factory production of building waste shredders has the following characteristics: First, the double rotor smashed up and down The two sets of rotors in series with each other make the crushed material produced by the upper rotor crushed again by the hammer of the lower rotor which is rapidly rotating. The inner materials collide rapidly with each other and smash each other to achieve the effect of hammer powder and powder material , Unloaded directly. Second, the hydraulic starter casing Hydraulic hoist device, only one person can easily hoist case, not only lightweight and fast and safe, easy to maintain. The machine is designed without mesh grate at the end of the material moisture content is not strictly required, there is no paste blocking sieve problem, but there is no fine powder can not be discharged in time, the problem of repeated crushing, so crushing efficiency, there is no hammer Invalid wear phenomenon. Third, there is no mesh grate at the end, high-humidity materials, not blocked The traditional grinder with grate plate does not adapt to raw materials with moisture content higher than 8%. When the raw material moisture content is higher than 10%, it is extremely easy to cause serious blockage, the hammer can not be rotated, the material can not be discharged, or even burn Bad motor, seriously affecting the production. Fourth, a unique two-way gap technology After the hammerhead wear and liner between the larger gap becomes coarse, can be moved out of the center of the hammer position reduction and the gap between the liner to continue to use. You can also adjust the gap from the outside to the liner to control the particle size. A hammer can be used top three hammer. The pollution of construction waste in life is very harmful to our health, so SBM Heavy Industries has designed a variety of construction waste crusher. With the development of urban construction, more and more buildings to be demolished, followed by a large amount of construction waste, how to deal with construction waste has become a piece of municipal construction in front of a problem. Renewable resources in construction waste, including mainly muck, waste brick, waste concrete, waste wood, scrap steel, scrap metal components. Construction waste shredder equipment can turn these things into rubbish.
Construction waste crusher to promote the environment development Cars 02-21-18
No Picture

The situation of social development is fast changing, the development trend of low-carbon economy, the development trend of mining machinery industry has gradually become green, low carbon, environmental protection, and the theme of the launch to see a series of safety and energy-saving intelligent construction waste crusher. Construction waste crusher let green city construction is no longer flashy, but truly into the people's life. So we still need to continue to work hard to enhance the market competitiveness of enterprises, so as to enhance our independent innovation ability, and contribute to the development of social economy and the green and beautiful life of mankind.

Construction waste, like fly ash and waste slag, will be thrown away as waste, and the garbage is all over the mountain, taking up the area of cultivated land and polluting the environment. The construction waste crusher will gradually replace the traditional method of building garbage disposal and turn it into renewable resources.  We according to the needs of the development of the city, the success of the research into the construction waste crusher, can be removed from the concrete crushing after processed into recycled aggregate concrete aggregate, different uses of brick aggregate, the processing of construction waste into commodities, and directly use, but also greatly improve the the utilization efficiency of construction waste, effective implementation of the characteristics of the demolition project of environmental protection, no pollution, zero emissions.

In the process of construction waste disposal, mainly in the development of intelligent products, continuous learning and absorbing advanced technology knowledge, constantly optimize the construction waste disposal equipment in the production process, reduce unnecessary waste in the production process, but also reduce the production cycle of the product, to ensure customer requirements on product quality.

Construction Waste Crusher:

Mineral material crushing processing production line equipment Dating - Men 02-21-18

We can produce complete set of Ore Milling Equipment for crushing and processing mineral processing equipment and provide you with comprehensive technical support. The crushing and processing of mineral material is usually provided by vibrating feeder, jaw crusher, hydraulic cone crusher, vibrating screen, belt conveyor and other equipment Composition; suitable for iron ore, gold and other non-ferrous mineral processing; design output is generally 50-1000 tons / hour.

Ore Milling Equipment spindle is mounted vertically. Vertical milling head to replace the horizontal spindle hanging beams, arbor and supporting parts, and can be adjusted in the vertical plane angle. The vertical milling machine is suitable for the machining of surfaces, grooves, steps and other surfaces in single-piece and batch production. It also can be used for beveling. If it cooperates with indexing head and circular worktable, it can also process gears, cams and hinges Knife, bit and other helical surface. This product saves land and saves energy. Small and robust, this product is ideal for precision or precision medical or precision workpieces.

the importance of ultrafine mill in the cement production line Cars 02-20-18
No Picture

In the series of pulverizer products developed by the company, there is a series of common series, that is ultrafine mill. This Ultrafine Mill has an important role in the production of cement. With the rapid development of the domestic real estate, real estate and related downstream industries have been developing very fast, the industry, ore processing in cement production machinery manufacturing industry have made great development, and the development process in cement production industry, cannot do without the help of ultrafine mill.

Cement is necessary for building construction products, and is mainly sand, water mixing into concrete, cement in concrete production plays the main role is the binder, and the steel and concrete production is the main material for building construction, from this point we can see that an important role in the construction of cement built in.

Cement is a widely used product. In order to meet the demand for cement in the market, many customers are engaged in cement processing and production, so how is cement produced? Generally speaking, cement is the process of processing ore powder after firing. Mineral powder is an important material for cement production, so to produce cement, we first need to produce mineral powder.

There are many kinds of different kinds of ore powder, because it was obtained after grinding, ore is different, and in the production of cement powder needed is mostly obtained by limestone after grinding, grinding into powder or limestone, is a raw material for cement production.

Because in the cement production of limestone powder fineness requirements are not very high, so we used to ultrafine mill powder grinding is different from other milling equipment, we usually use ultrafine mill to grind limestone in cement production, because the vertical milling machine company development and production to grind limestone, limestone and the ground below 650 mesh the fineness, and customers through the finished material fineness regulation can accurately adjust the fineness of slag, limestone for specific processing, so as to meet the requirements of cement production, in order to serve the construction industry, so as to bring economic benefits to customers.

Ultrafine mill is the most commonly used equipment in cement production. It can not only be used as grinding material for limestone and other raw materials, but also can be used for the production of desulfurizer, so as to help the flue gas desulfurization of cement plant after burning, so as to achieve environmental protection production.

Urban construction waste crushing station preferred SBM miner Cars - Economy cars 02-06-18
No Picture
Nowadays, the actual service life of buildings in our country is generally 25 to 30 years. Some newly built buildings have also been demolished, which is also called the phenomenon of "building life". Not only is it causing serious waste of resources, but also polluting the environment, not only is the city dusty and dusty all the day, but also more and more cities are being hitched again and again. And more and more cities are littered with construction rubbish, The more arable land has to be "transformed" into a landfill. In fact, the construction waste is misplaced resources, it is transformed into building materials is the embodiment of circular economy. Henan Shengtian Environmental Renewable Resources Co., Ltd. to introduce SBM mine research and development production YPS building rubbish crushing plant launched construction waste crusher project in Zhengzhou, and several well-known domestic universities to set up Henan's first recycling of construction waste Use research demonstration base. The construction waste crusher processing capacity of 2 million tons / year. Recycled aggregate, drywall retaining wall, pavement brick, grass planting brick, permeable brick, hydraulic brick, tile and other seven major categories of products processed by the construction waste crushing station include recycled fine aggregate, medium aggregate, Coarse aggregate, small standard brick, guide blind brick, square brick, porous wall brick, single row hole wall brick, maple leaf brick, Spanish brick, Dutch brick, hollow brick, semicircular curb, Stone, single-hole grass planting brick, well-shaped planting grass brick, single-hole interlocking hydraulic brick, toothed planting brick, four hole grass planting brick, grass planting brick and so on more than 20 varieties. Shenzhen Nankai Science and Technology Co., Ltd. adopts SBM mine construction rubble crushing and brick-making equipment. The construction rubbish can be made into 15 types of green regenerated building materials products such as recycled aggregate, solid brick, hollow brick, colored Dutch brick, permeable brick, Products will be fully used for the South Division, deep new campus construction. At present, the use of construction waste to produce new building materials has been widely used in a number of construction projects, so that enterprises have achieved good economic and ecological benefits. The new building materials produced by the construction waste treatment equipment are superior to other building materials products in terms of quality and hardness. No harmful gases are generated in the whole production process and the zero emission of local construction waste is basically achieved. It is reported that the South Branch of the building waste disposal methods used on-site, saving about 6 hectares of land resources; according to comprehensive utilization of construction waste recycling rate of 90% total, natural sand and raw materials can reduce the consumption of 600,000 cubic meters; can save construction Disposal of landfills and landfill disposal costs more than 4000 million; to achieve the output value of more than 6,000 yuan. After testing, construction waste made of bricks, construction waste content generally up to 70% -80%, some of the models made entirely of construction waste. The fine aggregate and grout made of such ordinary cement brick ratio, compressive strength exceeds the national standard, up to 30 MPa, much higher than the average solid brick, sintered brick. The construction waste disposal equipment can solve the contradiction problem of urban construction waste and turn waste into treasure at the same time. The construction waste can be recycled and reused, which is in line with the state's policy of developing circular economy and protecting the environment. The use of advanced dust removal equipment, noise, dust emissions fully meet the requirements of the EIA. The state encourages the comprehensive utilization of construction waste and encourages construction units and construction units to give priority to the comprehensive utilization of construction waste products.
Ultrafine Mill Industry will never be Overdue Cars - Economy cars 02-05-18
No Picture
SBM ultrafine mill are rich and various in models and types which is one of the main reasons for many customers to choose SBM Machinery. In addition, the quality of our crushing equipment counts as one of the best in the mining machinery industry. SBM Mining Machinery Co., Ltd has been established for many years, going through all ups and downs and finally stands out in the fierce competition, and nowadays SBM Machinery has grown into a strong performer in the mining equipment industry. The impact crusher mainly follows the socialized scientific information road, constantly innovates and create advantages for the advanced mining machines based on digitization, intelligentizlization and automation. The hydraulic pressure series products like roller crusher, hammer crusher and jaw crusher all reached fresh multi-month highs in the market shares. This series of products researched, developed and produced by SBM Machinery not only has subjective condition, but has objective condition, so that it has vast market. The industrial development will never be possible with the unique coordination of the ultrafine mill manufacturers and the customers. The market has been developing towards extensive and specialization direction, so that when the customers are buying the products, what they consider more is the technological content and afterward benefits of the products. For this reason, in the mining machinery dictionary, the word overdue will be impossible. Every time the customers come to our company, they will say that they have seen more advanced equipment and technology, and the always improving technology also free the customers of aftersales service after they bought the equipment.
Key Technical Analysis of Mobile Building Waste Disintegrator Dating - Men 02-05-18
No Picture
Mobile construction waste crusher key technical analysis: (1) noise reduction vibration reduction technology The device vibrates under pressure during operation. Unbalanced vibration of the crusher rotor and the inhomogeneity of the crushed material are the main sources of stochastic excitation force. Periodic vibrations of the exciter in the device generate periodic excitation forces. These unusual vibrations will not only induce resonance of the device, damage the device, reduce the service life of the device, but also generate noise and pollute the environment. (2) Divide the module In order to modular design of the device, you need to divide the module. There are many ways to divide modules, usually based on functional analysis, the more reasonable choice of modules. The method first analyzes the function of the product, analyzes the overall function of the device, formulates some basic function units, and then resets the module according to the correlation of related function units. The measure of the degree of functional units and the degree of decomposition of the total function of the product is a key issue in the module division, which is the basis for the reconstruction of equipment. After modularizing the equipment, the functional requirements that satisfy the customer's individual needs groups and equipment should be assessed.
Mobile crusher is outstanding in the construction waste crushing industry Cars 02-04-18
No Picture

Mobile crushing station since r&d manufacturing and turn it into the market in construction waste treatment industry raised a hot wave of giant construction garbage regeneration process, the construction waste crusher configuration of drive half a mobile rubber-tyred mobile crushing station and automatic crawler mobile crusher, can literally mobile devices to want processing of construction waste places, has broken the traditional construction waste processing mode, at certain places for comprehensive utilization of construction waste in China opens a new convenient green channel.

Variegated mobile crushing station is the integration of the whole machine, construction waste processing production line, it combines feeding, crushing, transmission, processing, recycling and processing, and other processing technology is an organic whole, very convenient, construction waste is a big obstacle in the development of our country's city, is also the most headaches and pressing issues on its government, mobile crushing station, can make construction waste directly into the thickness aggregates and soil, and can be used to replace sand used in construction or processed into concrete and brick wall materials and environmental protection, etc., both reducing the construction waste and solid waste pollution to the environment, also save a large amount of natural mineral resources, really realize the circulation economy development.

Mobile crushing plant in our country start time is relatively late, development history is short for construction waste processing, a high degree of automation configuration is very easy to operate, the capacity of equipment, a wide range of optional parts to adapt to a variety of applications. The operation cost is greatly reduced, the operation rate is high, and the crushing efficiency is high. Reliable production, continuous operation.

Factors affecting the feeding effect of Raymond mill Cars - Economy cars 02-04-18
No Picture
In the Raymond mill milling material production, feeding and feeding effect is one of the important prerequisites for the normal operation of raymond mill. So, in milling operations, Raymond mill feeding effect of what factors? 1, feeding roller gear type equipped. Under normal circumstances, the common production of milling roller feed the basic tooth-shaped trapezoidal teeth, saw teeth, helical teeth and bovine teeth and so on. In these different types of toothed gear, the trapezoidal teeth are generally suitable for better, less-spun materials, and the saw-tooth is suitable for less-splintered materials. Among them, the trapezoidal tooth not only has strong abrasion resistance, it is not easy to make the material stick to the equipment, become a wider range of use of tooth. 2, feed roller speed. In Raymond grinding material milling process, the feeding roller speed is an important parameter affecting the feeding effect. If the feed roller speed is too high, the material under the action of a strong centrifugal force may appear in the roller surface slip, or premature throw away from the feeding roller phenomenon. If the feed roller speed is too low, it will not only affect the production efficiency of Raymond mill, but also the average feed effect of Raymond mill. 3, the gate gap uniformity. For Raymond mill, the uniformity of the gate gap is one of the important factors that affect the feed effect. With the continuous development of Raymond mill technology, the support at the end of the Raymond abrasive gate that is now on the market is adjustable. In order to ensure the feeding uniformity of the small feeding flow, special attention should be paid to the straightness of the knife gate in both directions when machining parts. In order to ensure high efficiency and high quality operation of Raymond mill in grinding and milling operations, the fineness of powder can better meet the needs of users and reduce the incidence of failure in grinding operation. Usually, Traffic automatically adjust the function. That is based on changes in incoming material flow to automatically adjust the feed flow to ensure the automatic type of equipment, intelligent and efficient operation.
Crusher Mobile, Mobile Crushing Plant Cars - Economy cars 02-02-18
No Picture
Detailed Introduction to Crusher Mobile: The research, development and launch of crusher mobile eliminate the cockamamie steel frame and the construction of foundation during the crushing process, which helps to save much more time of mining makers. The ultrafine mill plant can directly choose the crushing site and it can be directly installed in the crushing spot and there is no need for transportation. For this reason, the mobile crushing plant is peculiarly suitable for small crushing spot and for processing and crushing building wastes. Picture of Crusher Portable: Features and Benefits of Portable Breaker: The mobile crushing machine has many advantages such as reasonable matching of all levels of crushing equipment, smooth material discharging, reliable operation, convenient manipulation and high efficiency and energy saving. In particular, this portable crushing plant has excellent maneuverability, and it is able to expand together with the raw materials site or the crushing spot, and it can also combine with other mobile crushing and screening plant in order to satisfy different material needs of the customers. Superior Performance of Hanging Portable Mining Equipment: Hanging portable mining equipment is built around proven jaw crusher concepts. It combines a high reduction ratio and increases the production capacity with any feed materials: from extra hard rock to recycled materials. In addition, Hanging trucked ultrafine mill and tire ultrafine mill offer superior strength, crushing performance and reliability even in the most demanding applications. All the Hanging People welcome you to come to our company to inspect and purchase the mobile mining plant.
Construction waste disposal, mobile crushing plant Cars - Economy cars 02-02-18
No Picture
According to reliable statistics, the construction waste crusher conforms to the product of recycling green economy, which can be effectively reflected by the professional crushing equipment, its recovery and economic and social double values. The professional crushing plant, Yifan Machinery's mobile crushing plant, can effectively crush construction waste. Well, the question came, what is the recovery value of these construction rubbish after the mobile crushing station has been treated? The brunt of the construction waste recycled aggregate, which is reflected in the value of construction waste recycling one. As in the new round of construction, aggregate, concrete are all the necessary building materials. However, there is a shortage of these infrastructure materials in the market. The aggregates produced by the construction waste crushing plant can solve the raw materials needed in the new construction. In addition, construction waste recycled brick, concrete, and some building high value-added products (such as thermal insulation materials, wall insulation around the wall, dry mortar), is also the main embodiment of the value of the construction waste recycling. Mobile crushing plant to deal with construction waste not only on the garbage pollution of the environment, occupy the vacant land for effective eradication, but also for the new round of construction contributed to the market in short supply of basic raw materials, mobile crushing station generated economic value, social benefits, Both have great positive effects on the development of local cities.
Influence factors of fineness of ultrafine mill Cars 02-01-18
No Picture
The ultrafine mill distributed widely in the different parts of the equipment manufacturers, have different advantages, ultrafine mill also has the difference in quality, performance, and the problems encountered in the work is various, reduce but cannot do without change and fineness of production capacity, as well as parts of the fault. Here is to introduce the area of the production of ultrafine mill at work, for what are the main influential factors of fineness. According to the working principle of the equipment and the size of the different types of equipment in the working time and the requirements for its feeding properties, the factors that cause the fineness change in their work are mainly the following aspects. What are the factors affecting the fineness of the ultrafine mill 1, material properties, such as hardness is too large, will cause the increase of milling difficulty, the ultrafine mill output and fineness of change, in view of this phenomenon, we need to ensure that the fineness of equipment, working in time, ensure the feed processing equipment meets the requirements, at the same time to ensure the block and powder in proportion to the mineral reasonable and stable, so as to achieve uniform powder fineness; 2, when the work of ultrafine mill, one of the factors of speed but also affect its fineness in general, if the speed is too high or too low, will make the meal or flour early transfer to the powder outlet. The influence of material fineness, the phenomenon of the solution is through regulating the size of motor current milling machine to achieve the speed of adjustment, so as to realize the reasonable fineness requirements; 3, ultrafine mill grinding the finished product in the collection process, through the classification of the screening device selection, does not meet the requirements of the fineness of the mill will be two times, to improve the fineness of grinding fineness, ensure uniform, so for the screening device selection and use is also very important; 4, Wear caused by the change of the fineness of ultrafine mill internal parts, because once the wear phenomenon, will cause the material grinding insufficient phenomenon, this makes the fineness of change, in view of this phenomenon, when we need to feed, to ensure the material properties meet the equipment requirements, in order to to reduce the wear degree, and in the daily production, attention to equipment maintenance, prolong its service life.
Crawler Type construction waste crushers can Do Better Cars - Economy cars 02-01-18
No Picture
When designing the crawler type construction waste crusher, our company puts customers benefit in the first place. We aim to provide users with simple, efficient and low cost crawler type construction waste crushers. Our crawler type construction waste crusher is more advanced than the traditional ordinary construction waste crushers because of the following unique advantages: The crawler type construction waste crusher is equipped with the large pulling torque featuring high driven power and reliability. The engine of the crusher can be armed with the military low temperature pre-heating starter which will makes it easy for the crusher to start up in cold weather with the temperature below 25 C. The crawler type construction waste crusher can work under any circumstance at any position of the work site, which reduces the labor for handling materials and makes it easy for all accessory machines to cooperate with each other. Through the wireless remote control, users can drive the construction waste crusher onto the trailer and then transport it to the work place. The crawler type construction waste crusher needs no installation and allocation time, so it can start to work immediately once it comes to the work site, which removes the limit of the coarse and fine crushing processes. The walking system of the crawler type construction waste crusher adopts the total power variable open hydraulic system which features good performance and can make full use of the engines power. Its imported service guiding operation system makes the crusher not only easy to be operated and controlled, but also to realize the infinite speed change walking.
SBM ultrafine powder mill processing calcium carbonate after a lot of use Cars - Economy cars 02-01-18
No Picture
In the paper industry, as the sizing technology in the papermaking process shifts from acid sizing to neutral sizing, there is a huge potential market for the use of calcium carbonate. The high whiteness of calcium carbonate used as filler in papermaking can greatly improve the paper performance. As a result of replacing the expensive kaolin, the paper mill can obtain obvious economic benefits. ultrafine mill carbonate is used in ink products to exhibit excellent dispersibility, transparency, excellent gloss and hiding power, as well as excellent ink absorbency and drying properties. The ultrafine calcium carbonate used in the ink must be activated and the crystal form is spherical or cubic. Superfine calcium carbonate also as a calcium source additive can be used in health food and feed industry, with high quality and cheap and easy to absorb and so on. Superfine calcium carbonate can be used as high-end cosmetics, soap, facial cleanser, toothpaste and other children's day packing products. In the pharmaceutical industry, ultrafine calcium carbonate is an important component in the medium and a calcium source additive. It is used as a buffering agent for microbial fermentation in the production of antibiotics, and plays a certain pharmacological role in analgesics and stomach medicines. In summary, China's demand for ultra-fine calcium carbonate powder has more than 4 million tons, the amount of detergent on the powder more than 800,000 tons. The production of automobile friction materials based on the raw materials of fine powders has also reached 400,000 tons. The increase of the industrial demand for the subdivisions is bound to drive the development of the mill. Conform to this development, SBM professional production of ultra-fine calcium carbonate powder mill efficient energy-saving, greatly improved wearing parts wear, product efficiency, and environmentally friendly pollution-free, suitable for modern production requirements.
The cause and treatment method of heating of the bearing of the stone crusher Cars 02-01-18
No Picture

Stone stone crusher is a kind of mechanical equipment for crushing and processing stone sand production process, common stone crushing equipment include jaw crusher, impact crusher, hammer crusher, cone crusher and so on, there is a big difference between the performance of different stone crushing machine, mainly to remind the user to bearing stone crusher, bearing stone crushing machine is a weak point.

It's a professional stone crushing equipment manufacturer. Here I would like to talk about the situation of the bearing temperature rising due to the chance of stone breaking, and what are the causes of this situation and how to deal with this situation. Here is a brief talk to you. The reason that the rotor bearing temperature of the stone crusher is too high may be in the following aspects.

The bearing clearance is too small for the stone crusher to cause the bearing temperature to rise too high. The selection of the grades of the lubricating oil of the stone crusher is not proper, the viscosity is too large or the viscosity is too small to form oil film, which can cause the bearing temperature to rise too high. Especially when the lubricating oil viscosity, not only increases the internal friction between the lubricating oil molecules, but also increases the friction between oil and metals, and excessive heat; improper installation of rubber plate rubber plate coupling is too thick, the stiffness, deflection, bearing friction, leading to rivalry, heat too much.

Knowing the cause of the temperature rise of the stone crusher bearing, the user can solve the problem of the temperature rise of the bearing of the stone crusher according to the reason. The user can meet the specified requirements by adjusting the bearing clearance, and the coaxial degree of the positive motor and the crusher rotor is less than 0.5mm. And using the level of the motor shaft two bearings, crusher flywheel rotor and bearing outer ring respectively for motor rotor and crusher rotor level, and then use the connecting pipe for cable crane review, hammer crusher motor and method review center line straightness, until the meet the requirements so far.

Cone-type Construction Waste Crusher Contributes much to Infrastructure Construction Cars - Economy cars 01-31-18
No Picture
At present, with the fast development of infrastructure construction, the demands for natural sand in the market are constantly increasing. However, the natural sand is not necessarily able to satisfy the construction needs, and at this time, the construction waste crusher equipment is researched and developed in time, and the artificial sand produced by this machine is able to perfectly replace the natural sand. The cone-type construction waste crusher researched and developed by our company has outstanding sand making effects. Since the quality of the sand and stone is high and the fine sand manufactured by this machine has very wide application range, this equipment enjoys great popularity in the market. The cone-type construction waste crusher manufactured by SBM Machinery is distinguished from that of other companies due to its unique structural design and the technology we use has been granted national patent certificate. Regarding the design, the cone-type construction waste crusher adopts a upper and a lower machine frame in order to buffer the impact on the spare parts of the machine from the materials and to protect the machine from being damaged, thus prolonging its service life. On the other hand, the unique upper and lower structure is able to make sure that the construction waste crusher can work in a stable manner during the sand making process even with high workload. And what is more, if the workers feed too many materials so that the machine is blocked, then the workers can open the upper cover and discharge the materials at any time so that the machine is able to run very fast. And finally the maintenance is more convenient.